Luvanto luxury vinyl flooring is an option for their home due to the low-cost benefits, with the other benefit that appeals being the low areas of maintenance required in keeping it in pristine condition.
Layering anti scratch, anti-stain, waterproof and moisture resistance technologies all in one place, people tend to feel that everything is in hand. With that in mind, a few little touches of care will ensure it keeps a longer life and healthier look.
When it comes to cleaning your vinyl flooring, don’t expect to be on your hands and knees for long periods of time. It also does not require expensive chemicals to retain its fresh appeal. In fact, it is among the easiest products to clean quickly on the market.
When it comes to spillages such as juice or alcohol, simply sponging with warm soapy water or washing up liquid will remove most stains with placement on for no more than 15 minutes.
Those harder to shift stains from sauces or ink-based liquids require cleaning where mixing warm water and bicarbonate soda together to form a paste like substance. Place this paste on the area and slowly rub until the stain is no longer visible and is completely gone.
Luvanto luxury vinyl flooring is able to block out any leakage between tiles and boards due to being 100 percent waterproof, A simple household mop or sponge-based cleaning item is all that is required.
If you use a simple floor cleaning solution, you can use vinegar or washing up liquid mixed with hot water to remove any deep stain that is stubborn. Be sure to thoroughly wring the mop after each section not drenching your floor with more water, which can truly test your waterproof planks or tiles.
Your floor can receive damage from too much water and cause discoloration, warping or bubbling up if the subfloor is soaked.
Scratches and Scuffs
However, in the event of deep scratches, it’s reassuring to know that individual tiles and planks can be replaced without taking up huge sections of the floor with ease. Scratches in vinyl flooring can be repaired inexpensively with the use of sandpaper, car wax and dish detergent (as long as none have any rubber extract within it). All dirt on the floor must be cleared before sanding down the vinyl so as not to damage the finish.
The use of dish detergent and water to clean away any dust from the sandpaper is advised, after which you can circle buff the floor with some car wax and a clean rag to give the floor a finish and have it look as good as new. The wear layer should also feel the same as other surrounding boards.
Always consult with your supplier on the best cleaning techniques and products for your flooring to keep it looking amazing.